Persian

 

Personal Information

Date of Birth:  21st March 1970          

Marital Status: Married with two children

Address: Chemical Engineering Department, Iran University of

 Science and Technology, Narmak, Tehran, 16846, Iran.

Phone Number: (9821)7391-2714

Fax Number: (9821)7724-0495, E-mail: hashemabadi@iust.ac.ir

Burn Sphere CFD Simulation

Educational Qualifications

  • ·        Undergraduate Course in Chemical Engineering (Petrochemical ) Amirkabir University of  Technology, (Tehran Polytechnic) 1988-1992.

  •       Thesis Title: "Experimental Preparation of Chemical Manganese Dioxide (CMD) and Pilot Plant Design"

  • ·        Postgraduate Course and Research in Chemical Engineering, Amirkabir University of Technology, (Tehran Polytechnic) 1992-1995.

  • Thesis Title: “Experimental & Numerical analysis of Laminar Heat Transfer of  Non-Newtonian Fluids in Pipe with    Temperature Dependent Viscosity"    

  • ·        Ph.D.  Course and Research in Chemical Engineering, Amirkabir University of Technology, (Tehran Polytechnic), 1995-2002.

  •       Thesis Title: "Numerical and Analytical Modeling of Laminar Heat Transfer to Viscoelastic Fluid in non-Circular Ducts"

 Research Experience

  • "Experimental Preparation of Electrolytic Manganese Dioxide (EMD) and Pilot Plant Design" M.R. Golkar Naranji, S.H. Hashemabadi, Independent Project at Amirkabir University of Technology, (Tehran Polytechnic)

  •  "Development of Computer Software for Determination of Thermo physical Properties of Rubber Compounds (CORC)" S.H. Hashemabadi, B. Dabir, Kerman Tire & Rubber (Barez) CO

  • "Study of Rotary Kiln Transport Phenomena, J. Thibault, S.Gh. Etemad, S.H. Hashemabadi, Ottawa university- Canada

Journal Publications

1.      1. Garnavi L., Kasiri  N. and Hashemabadi S.H., Mathematical modeling of a continuous fluidized bed dryer , International Communications in Heat and Mass Transfer, In Press, Available online 29 March 2006.

      2.  Hashemabadi S.H. and Etemad S.Gh., Effect of rounded corners on the secondary flow of viscoelastic fluids through non-circular ducts, International Journal of Heat and Mass Transfer, Vol 49/11-12 pp 1986-1990, 2006.

      3. Mirzazadeh M., Escudier M.P., Rashidi F., Hashemabadi S.H., Analytical Solution of purely tangential flow for PTT viscoelastic fluid through concentric annulus, J. Non-Newtonian Fluid Mech. Vol. 129, pp. 88–97, 2005.

      4. Hashemabadi S.H., Etemad S.Gh. and Thibault J., Analytical Solution of Viscoelastic Fluid Flow and Heat Transfer through an Annulus, Heat Transfer Engineering, Vol. 26(2), pp. 1-5, 2005.

     5.  Hashemabadi S.H., Etemad S.Gh. and Thibault J., Forced convection heat transfer of Couette-Poiseulle flow of nonlinear viscoelastic fluids between parallel plates, Int. J. of Heat and Mass Transfer, Vol. 47, pp. 3985-3991, 2004.

    6. Hashemabadi S.H., Etemad S.Gh., Thibault, J. and Golkar Naranji M.R., Analytical solution for dynamics pressurization of viscoelastic fluids, Int. J. of Heat and Fluid Flow Vol. 24, pp.137-144, 2003.

     7. Hashemabadi S.H., Etemad S.Gh., Golkar Naranji M.R. and Thibault J., Mathematical modeling of laminar forced convection of simplified Phan-Thien-Tanner (SPTT) fluid between moving parallel plates,  Int. Comm. Heat and Mass Transfer, Vol. 30, No. 2, pp. 197-205, 2003.

      8. Hashemabadi S.H., Etemad S.Gh., Golkar Naranji M.R. and Thibault J., Laminar flow of non-Newtonian fluid in right triangular ducts, , Int. Comm. Heat and Mass Transfer, Vol. 30, No. 1, pp. 53-60, 2003.

      9. Etemad S.Gh, Thibault, J. and Hahsemabadi, S.H., Calculation the pitot tube correction factor for Newtonian and non-Newtonian fluid, ISA Transaction, Vol. 42, pp. 1-8, 2003.

     10. Hashemabadi S.H., Etemad S.Gh. and Thibault J., Forced convection heat transfer of Couette-Poiseulle flow of nonlinear viscoelastic fluids between parallel plates, Int. J. of Heat and Mass Transfer, Vol. 47, Issues 17-18, Pages 3985-3991, 2004.

 

     Conference Publications

 

1.      Hashemabadi S.H. and Vahid A., Analytical Solution of Couette-Poiseulle Flow of non-Linear Viscoelastic Fluid through Annular Ducts, The Society of Rheology: 77th  Annual Meeting, Vancouver, British Columbia, Canada, 2005.

2.      Hashemabadi S.H. and Kharaghani R., Mathematical Modeling of Calendaring Process for non-Linear Viscoelastic Fluid, 10th Iranian Chemical Engineering Congress, Sistan & Baluchestan University, Zahedan, 2005.

3.      Hashemabadi S.H. and Mirnajafizada S.M., Analysis of Lubrication Theory for non-Linear Viscoelastic Fluid with Simplified Phan-Thien-Tanner (SPTT) Model, 10th Iranian Chemical Engineering Congress, Sistan & Baluchestan University, Zahedan, 2005.

4.      Hashemabadi S.H. and Vahid A., Parametric Study of a non-Isothermal Tubular Reactor Performance by CFD Modeling, 10th Iranian Chemical Engineering Congress, Sistan & Baluchestan University, Zahedan, 2005.

5.      Hashemabadi S.H., Dehnavi M.A. and Shahhosini S., CFD Simulation of Concentration Distribution in a Porous Catalyst Pellet Using FEMLAB, 10th Iranian Chemical Engineering Congress, Sistan & Baluchestan University, Zahedan, 2005.

6.       Hashemabadi S.H., Sadrzadeh M. and Behjat  Y., Simulation of oxygen diffusion through the respiratory membrane,  10th Iranian Chemical Engineering Congress, Sistan & Baluchestan University, Zahedan, 2005.

7.      Hashemabadi S.H., Rahmat M.M., Sotoodeh F., Sadegh N., Molaei M. and Harirchian Saei S., Effect of Environmental Conditions on Rheological Properties of  Sealers in Automotive Industry, ISPST 2005, Amirkabir  university, 2005.

8.      Garnavi L., Kasiri N., Hashemabadi S.H., Computer Simulation of Fluidized Bed Dryer with Bubble Size Variation, 14th Int. Drying Syposium, IDS2004, 22-25 Aug, Sao Paulo, Brazil.

9.      Mirzazadeh M., Rashidi F., Hashemabadi S.H., SPTT Viscoelastic Fluid Flow in Concentric Annuli with Inner Cylinder Rotation, Accepted for Oral Presentation at 9th Iranian Chemical Engineering Conference, Iran University of Science and Technology, Tehran, Iran, Nov. 2004.

10.  Kasiri N., Hashemabadi S.H., Khazraee M., Shahhosseini S., ­Mathematical Modeling and Computer Simulation of  Continuous Rotary Dryers, Accepted for Oral Presentation at 9th Iranian Chemical Engineering Conference, Iran University of Science and Technology, Tehran, Iran,  Nov. 2004.

11.  Hashemabadi[1] S.H., Kharaghani R., The Effect of Different Spacers on Mass Transfer of Membranes, Accepted for Oral Presentation at 9th Iranian Chemical Engineering Conference, Iran University of Science and Technology, Tehran, Iran,  Nov. 2004.

12.     Hashemabadi S.H., Dehghani M.R." Importance of Cleanroom Technology for Reduction of Particle Defect in Automotive Paint" 3rd Conference of Paint, Coating and Chemicals, Amirkabir University, Tehran, Iran, 2004.

13.  Hashemabadi S.H. and Etemad S.Gh., The Effect of Rounded Corners on the Secondary Flows of Viscoelastic Fluid in non-Circular Duct", 8th Iranian National Chemical Eng. Congress, Ferdowsi University, Mashad, Iran 2003.

14.  Hashemabadi S.H., Etemad S.Gh., Golkar Naranji M.R. and Thibault, J., Analytical solution of forced convection of nonlinear viscoelastic fluids between parallel plates with moving boundary, 15th International Congress of Chemical and Process Engineering  (CHISA 2002), August 25-29, 2002, Praha, Czech Republic.

15.  Hashemabadi S.H., Etemad S.Gh., Golkar Naranji M.R. and Thibault J., Analytical solution of axial flow and heat transfer of viscoelastic fluid through annular duct, International Conference on Computational and Mathematical Methods in Science and Engineering (CMMSE-2002), September 20-25, 2002, Alicant, Spain.

16.  Etemad S.Gh, Thibault, J. and Hahsemabadi, S.H., Calculation the pitot tube correction factor for Newtonian and non-Newtonian fluid, 52nd Canadian Chemical Engineering Conference, Vancouver, Canada, October 20-23, 2002.

17.  Hashemabadi S.H. and Golkar Naranji M.R., Laminar non isothermal heat transfer of non-Newtonian fluids in pipe ", Second National Congress of Chemical Eng. AmirKabir University of Technology, (Tehran Polytechnic), Iran 1996.

 Teaching Experience

·    Computational Fluid Dynamics (CFD) in Chemical Engineering, Graduate Course in Chemical Engineering, Iran University of Science and Technology, 2004-  present.

·  Advance Fluid Mechanics, Graduate Course in Chemical Engineering, Iran University of Science and Technology, 2003- present.

·     Fluid Mechanic II (Two-Phase Flow), Undergraduate Course in Chemical Engineering, Iran University of Science and Technology, Tehran, 2003-present.

·     Selection and Design of Process’s Equipments, Undergraduate Course in Chemical Engineering, Iran University of Science and Technology, Tehran 1997-present.

·     Process Control, Undergraduate Course in chemical Engineering, AmirKabir University of Technology, (Tehran Polytechnic) 1993- 2002.

·        Site Training of Engineers in National Petrochemical Co. (NPC), 1996-1998.

·        Computer Courses in Chemical Engineering Department, AmirKabir University of Technology, (Tehran Polytechnic) 1992-1995..

 Industrial Experience

·        Effect of Enviromental Conditions on Rheological Properties of Sealer in Automotive Industry, Iran Khodro Co. (IKCO), 2004.

·        CFD Simulation of Robot Sealer Spray Nozzels, Iran Khodro Co. (IKCO), 2005.

·        Designer and Advanced Inspector on Construction, Installation and Operation of   Turbocharger Part Cleaning Line, Iranian Railway company, Tehran, Iran, 1997-1999

·        Designer and Advanced Inspector on Construction, Installation and Operation of Alum Production line Equipments with 10’000 ton /year capacity, Takestan, Iran, 1999-2001.

 

Awards

·        Top Ph.D. Student  Graduated in 2002 from Amirkabir University, Tehran, Iran.

·        Top M.S. Student  Graduated in 1995 from Amirkabir University, Tehran, Iran.

·        Top B.S Student  Graduated in 1992 from Amirkabir University, Tehran, Iran.

·        Pre-doctoral Fellowship, Department of Chemical Engineering, Ottawa University, Ottawa, Canada, 2001.

 

Computer Skills

·        Knowledge of main operating systems : Win 2000, NT

·        Language: Fortran, Qbasic, Visual Basic (VB)

·        Chemical Eng. Software: Hysys, Chemcad

·        Expert in CFD Softwares  (Fluent, Fidap, FEMLAB, CFX)

·        Other: Matlab, Maple, Office 2000, Grapher, Tecplot, Autocad 2000,  Statistica, etc.

Interest

Application of CFD in Chemical Engineering, Rheology, Fluid Mechanic, Multiphase Flow, Modeling and Simulation of Process, Numerical Analysis (Include: Finite Element, Finite Volume, …), Drying Technology, Heat Transfer