Assistant Professor and Head of Automotive Electronics department
Education
Ph.D. in Electrical and Computer Engineering, University of British Columbia (UBC), Vancouver, Canada
M.Sc. in Electrical Engineering, Amirkabir University of Technology, Tehran, Iran
B.Sc. in Electrical Engineering, Amirkabir University of Technology, Tehran, Iran
Research
List of the research topics are as follows:
Modeling, management, and manufacturing of energy storage systems and lithium-ion batteries
Modeling, design, and fabrication of Battery Management Systems (BMS)
Design, simulation, and fabrication of automotive controllers such as ECU and VCU
Control of hybrid and electric vehicles
Simulation and fabrication of Microelectromechanical Systems (MEMS)
Some of the projects carried out are as follows:
Design, simulation, and fabrication of Engine Control Unit (ECU) for a gasoline engine
Design, simulation, and fabrication of Battery Management System (BMS) for an automotive battery pack
Design, simulation, and fabrication of battery charger for an electric solar car
Design of electrical systems in the "National Car Platform Project" including Electrical Distribution System (EDS), battery system, dashboard display system, and in-car audio system
Media
Workshop: Design of Battery Management Systems with a Focus on Automotive Applications. Presented at the First International and Second National Conference on Lithium Batteries
Topics:
History of Electric Vehicles
Assemblies and Specific Components of Electric Vehicles
Battery Technologies
Battery Testing Procedures
Battery Modeling and Battery Management System (BMS) Functions
Hardware Considerations for Battery Management Systems (BMS)
Charkh Program featuring Dr. Masoud Dahmardeh (Topic: Hybrid Vehicles).
The Third Seminar of Electric Vehicles on "Battery and Types of Manufacturing Technologies"
The series of scientific and specialized seminars on electric vehicles started three weeks ago with the idea and initiative of SAIPA Automotive Group President. The third seminar of this series was held at ParsKhodro on the 9th of January 2024 in which Mohammad Reza Sheikh Attar, SAIPA Group Member of the Board of Directors and Vice President in the field of Production and Supply; Amir Hossein Tayebi, Director of SAIPA Group of Strategic Studies and Media; and Masoud Dahmardeh, an assistant Professor at Automotive Engineering Faculty of Iran University of Science and Technology, presented their expert speeches on "Electric Vehicle Batteries and Various Manufacturing Technologies".
Masoud Dahmardeh was the last lecturer of the seminar. He gave a brief history of electric vehicle batteries and the evolutionary process that has taken place in this field. Dahamardeh said: "LFP batteries have many advantages, that's why they are widely accepted. Among many features, it can be pointed out the low cost of production due to the use of iron, no need for expensive metals, high safety, and long life. Despite having disadvantages such as poor energy reception from the battery, the LFP battery is very popular in China. By using LFP batteries to produce electric vehicles, economic cars can be launched on the market."
Publications
Some of the publications are listed below. To see the full list, please visit my Google Scholar page at:
Rezaei, Omid, Ali Rahdan, Sohrab Sardari, Masoud Dahmardeh, and Zhanle Wang. "A fuzzy robust two-stage unscented Kalman filter method for uncertainty and state of charge estimation of lithium-ion batteries." Journal of Energy Storage 68 (2023): 107883.
Dahmardeh, Masoud, Pouria Rahimirad, and Masoud Masih-Tehrani. "A Modern Simple Power Prediction Index for Improving Battery Life." International Transactions on Electrical Energy Systems 2022 (2022).
Rezaei, Omid, et al. "A robust and fast active fault tolerant control for quadrotor applications with actuator fault's unknown statistical characteristics." Journal of Vibration and Control (2022): 10775463221100062.
Hosseini, Seyed Jalil, and Masoud Dahmardeh. "Conversion of a donut-shaped pattern to a directive one using a wide frequency band hive-shaped pattern director antenna." Electromagnetics 41.8 (2021): 557-569.
Mokhtari, Ali, Masoud Masih-Tehrani, and Masoud Dahmardeh. "Control of electric vehicle hybrid energy storage systems considering aging and temperature effects." ELEKTRIKA-Journal of Electrical Engineering 20.2-2 (2021): 1-8.
Molaeimanesh, Gholam Reza, and Masoud Dahmardeh. "Pore-scale analysis of a PEM fuel cell cathode including carbon cloth gas diffusion layer by lattice Boltzmann method." Fuel Cells 21.3 (2021): 208-220.
Hosseini, Seyed Jalil, and Masoud Dahmardeh. "Compact smile-like mode converter antenna with high power capacity level." Electromagnetics 41.4 (2021): 275-291.
Akbari, Alireza, Masoud Dahmardeh, and Sayad Nasiri. "Optimization of the lookup table for a single-cylinder internal combustion engine." Journal of Mechanical Engineering 51.1 (2021): 39-47.
Hosseini, Seyed Jalil, Masoud Dahmardeh, and Mohsen Yousefian. "A high power TEM to TE10 mode converter with 70% bandwidth." Journal of Electromagnetic Waves and Applications 35.3 (2021): 389-399.
Molaeimanesh, G. R., SM Mirfallah Nasiry, and M. Dahmardeh. "Impact of configuration on the performance of a hybrid thermal management system including phase change material and water-cooling channels for Li-ion batteries." Applied Thermal Engineering 181 (2020): 116028.
Niasar, Erfan Hamsayeh Abbasi, Masoud Dahmardeh, and Hamed Saeidi Googarchin. "Optimization of a piezoelectric energy harvester considering electrical fatigue." Journal of Intelligent Material Systems and Structures 31.12 (2020): 1443-1454.
Masih-Tehrani, Masoud, Salman Ebrahimi-Nejad, and Masoud Dahmardeh. "Combined fuel consumption and emission optimization model for heavy construction equipment." Automation in Construction 110 (2020): 103007.
Niasar, Erfan Hamsayeh Abbasi, Masoud Dahmardeh, and Hamed Saeidi Googarchin. "Roadway piezoelectric energy harvester design considering electrical and mechanical performances." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 234.1 (2020): 32-48.
Solouk, Mohammad Reza, Mohammad Hassan Shojaeefard, and Masoud Dahmardeh. "Parametric topology optimization of a MEMS gyroscope for automotive applications." Mechanical Systems and Signal Processing 128 (2019): 389-404.
Masih-Tehrani, Masoud, et al. "Wavelet-based power management for hybrid energy storage system." Journal of modern power systems and clean energy 7.4 (2019): 779-790.
Yousefian, Mohsen, Seyed Jalil Hosseini, and Masoud Dahmardeh. "Compact broadband coaxial to rectangular waveguide transition." Journal of Electromagnetic Waves and Applications 33.9 (2019): 1239-1247.
Rahimirad, Pouriya, Masoud Masih-Tehrani, and Masoud Dahmardeh. "Battery life investigation of a hybrid energy management system considering battery temperature effect." Int. J. Automot. Eng 9 (2019): 2966-2976.
Khalkhali, Abolfazl, et al. "Optimal design and applicability of electric power steering system for automotive platform." Journal of Central South University 26.4 (2019): 839-851.
Sajadinia, Hamed, Masoud Dahmardeh, and Mohammad Khalaj-Amirhosseini. "Novel planar diplexer using branch-line coupler." Microwave and Optical Technology Letters 60.11 (2018): 2773-2777.
Azarbar, Ali, Masoud Dahmardeh, and Mohammad Mahdi Taskhiri. "Phased array antenna using MEMS phase shifter." Automotive Science and Engineering 8.2 (2018): 2730-2738.
Shojaeefard, Mohammad Hassan, et al. "Optimal platform design using non-dominated sorting genetic algorithm II and technique for order of preference by similarity to ideal solution; application to automotive suspension system." Engineering Optimization 50.3 (2018): 471-482.
Masih-Tehrani, Masoud, and Masoud Dahmardeh. "A novel power distribution system employing state of available power estimation for a hybrid energy storage system." IEEE Transactions on Industrial Electronics 65.8 (2017): 6676-6685.
Luo, Yi, et al. "A resonant-heating stent for wireless endohyperthermia treatment of restenosis." Sensors and Actuators A: Physical 236 (2015): 323-333.
Luo, Yi, et al. "RF-powered stent with integrated circuit breaker for safeguarded wireless hyperthermia treatment." Journal of Microelectromechanical Systems 24.5 (2015): 1293-1302.
Luo, Yi, Masoud Dahmardeh, and Kenichi Takahata. "Biocompatible circuit-breaker chip for thermal management of biomedical microsystems." Journal of Micromechanics and Microengineering 25.5 (2015): 055002.
Sarwar, Mirza Saquib, et al. "Batch-mode micropatterning of carbon nanotube forests using UV-LIGA assisted micro-electro-discharge machining." Journal of Materials Processing Technology 214.11 (2014): 2537-2544.
Dahmardeh, Masoud, et al. "The effects of three-dimensional shaping of vertically aligned carbon-nanotube contacts for micro-electro-mechanical switches." Applied Physics Letters 103.23 (2013): 231606.
Xiao, Zhiming, et al. "Cone-shaped forest of aligned carbon nanotubes: An alternative probe for scanning microscopy." Applied Physics Letters 103.17 (2013): 171603.
Dahmardeh, Masoud, et al. "High-power MEMS switch enabled by carbon-nanotube contact and shape-memory-alloy actuator." physica status solidi (a) 210.4 (2013): 631-638.
Saleh, Tanveer, et al. "Dry micro-electro-discharge machining of carbon-nanotube forests using sulphur-hexafluoride." Carbon 52 (2013): 288-295.
Saleh, Tanveer, et al. "Transforming carbon nanotube forest from darkest absorber to reflective mirror." Applied Physics Letters 101.6 (2012): 061913.
Saleh, Tanveer, et al. "Field-emission-assisted approach to dry micro-electro-discharge machining of carbon-nanotube forests." Journal of Applied Physics 110.10 (2011): 103305.
Dahmardeh, Masoud, Ayaz Ghorbani, and Abdolali Abdipour. "Improved slow-wave active transmitting antenna with photonic band-gap and defected ground structure." AEU-International Journal of Electronics and Communications 66.2 (2012): 122-127.
Dahmardeh, Masoud, Alireza Nojeh, and Kenichi Takahata. "Possible mechanism in dry micro-electro-discharge machining of carbon-nanotube forests: A study of the effect of oxygen." Journal of Applied Physics 109.9 (2011): 093308.
Khalid, Waqas, et al. "High-aspect-ratio, free-form patterning of carbon nanotube forests using micro-electro-discharge machining." Diamond and Related Materials 19.11 (2010): 1405-1410.
Contact
You can contact me via email at mdahmardeh@iust.ac.ir.
